HotSpotSystem.com Installation Guide for Mesh Networks

Setup Your Own Hotspot with OPEN-MESH

 

•   Important note:

  This solution requires a Hotspot Operator Account at HotSpotSystem.com. You can create an Operator Account here. If you would like to see what features you will be able to use with our solutions, click here. If you already have an Operator Account, then read on...
•  

The setup is very straight-forward.

1. You need to log in to the Open-Mesh Dashboard (CloudTrax) (you need to create an Open-Mesh network by clicking on "Add Network" link or use your exiting network login and click on "Edit Network").

2. Add your devices to CloudTrax. Select the "Add/Edit Nodes" button and place each node on the map by clicking and dragging it to the correct location. You will need to fill out the MAC ID of each node (found on the back of each unit if you are using an Open-Mesh hardware). If you are using an Open-Mesh compatible hardware, then you need to find out the MAC address of the hardware (usually can be found on the packaging box).

3. Select HotspotSystem.com as your Captive Portal > AAA Provider and set the nasid for your location. Nasid is:

- For your first location, or if you have only one location, the nasid is your operator username.

- If you are using multiple locations the nasid must be set the following way: operatorname_locationid
  (for example: john_2 , if your operator username is john, and you would like to set up location #2)

• If you cannot find HotspotSystem.com as your radius config: you can use manual settings.

  
  RADIUS Server 1: radius.hotspotsystem.com
  RADIUS Server 2: radius2.hotspotsystem.com
  RADIUS Secret: hotsys123
  RADIUS NASID: operatorname_locationid
  UAM Server: https://customer.hotspotsystem.com
  UAM URL: /customer/hotspotlogin.php?mode=comb
  UAM Secret: hotsys123
  Allowed Domains:hotspotsystem.com,worldpay.com,paypal.com,paypalobjects.com,altfarm.mediaplex.com,paypal-metrics.com,paypal.112.2o7.net,open-mesh.com,adyen.com
  Chillispot Compatible: checked

•  

For Hotspot FREE SOCIAL locations only: You must add ,www.apple.com at the end of the Allowed Domains!

4. Change timezone to: Europe/London on the dashboard

Optional Step: You can add your own site to the end of the allowed domains list separated with a comma.

5. Press Update Network Settings on the top of the Dashboard.

6. Login to the Control Center and change your Internal Login/Logout URL to open-mesh (Manage Loc.> Modify HotSpot Data > Splash Page Settings

You're done!

Should you have any more questions or problems, you can read our Knowledgebase or contact Customer Service.